John Dewey And Education Education Essay

The thoughts of the great American philosopher, John Dewey, transformed the American instruction system. While all Dewey did was merely use some of his pragmatist philosophical ideals to the schoolroom, the consequences of his work changed instruction everlastingly. In the short essay, â€Å" My Pedagogic Creed, † Dewey gives his readers great insight into his thoughts sing what instruction is, how it should be done, and why it ‘s of import. Today, he is considered a â€Å" male parent of instruction † and his positions are being adapted in all kinds of ways in schoolrooms around the universe. Dewey foremost stood out by rejecting the traditional ideal of American instruction which was built around instructors standing up in the forepart of the schoolroom and pouring information into the heads of their pupils. Alternatively, Dewey suggested a new signifier of instruction that utilised applicable experience as the cardinal component of larning. Thesis sentences her e John Dewey embodies many of the matter-of-fact ideals that define American doctrine. He was born around the clip that Charles Darwin ‘s Origin of Species book came out, so the arguments environing that subject had a monumental influence on his doctrine. Along with many other American philosophers of Dewey ‘s clip, such as Charles Sanders Peirce, there was a desire to react to these new finds in evolutionary scientific discipline and happen out how they related to doctrine. Dewey believed that cognition was best discovered through the scientific method. As I will subsequently speak about, this is nowhere more prevailing than in Dewey ‘s theoretical account for instruction in which he defaults to hands-on experience and enquiry as the paramount key to larning. Traveling out into the existent universe and holding a unrecorded experience that could be tested and criticized by others in order to come on to something better was indispensable to Dewey ‘s position and a foundational belief of many American pragmatists. In the eyes of Dewey, instruction and life were one in the same. Dewey is quoted as stating, â€Å" instruction is a procedure of life and non a readying for future life † ( 8, My Pedagogic Creed ) . A proper instruction of the person was indispensable to the operation and growing of that person and the society they lived in, as school was foremost a â€Å" societal establishment. † School was to be centered on the community and the pupil was being developed in school so they could be an active member of the community. Dewey advocated that what a kid does in their place life should be incorporated into the course of study in the schoolroom. Besides for Dewey, the pupil had to be invested in their instruction for it to intend anything. The manner that he suggested this be accomplished was to allow the pupils learn about something they were interested in. An instruction could merely be valuable if the pupil was larning stuff that they could really use to their existent mu ndane life as evidenced by Dewey ‘s quotation mark, â€Å" True instruction comes through the stimulation of the kid ‘s powers by the demands of the societal state of affairss in which he finds himself † ( 2, My Pedagogic Creed ) . Dewey believed that instruction was a procedure of find where pupils would analyze what they were interested in at their ain gait as they were bit by bit going more cognizant of where their involvements laid. Dewey ‘s instruction system is possibly most good known for how it stresses the importance of â€Å" custodies on † experience in the acquisition procedure. Dewey believed that people learned best by traveling out and interactively â€Å" making. † Out were the yearss where instructors would talk on facts and information, coercing their thoughts onto the pupils. Dewey criticized instructors and the current instruction system for protecting pupils excessively closely and non allowing them travel out into the existent universe so they could bloom stating, â€Å" the state of affairs approaches larning to swim without traveling excessively near the H2O † ( The Relation of Theory to Practice, Dewey ) . For Dewey, a instructor ‘s occupation was more about being a facilitator to the pupils, assisting them discover what they were interested in and so making ways for them to actively ‘do ‘ these things. Ultimately for Dewey, larning grounded in ex perience combined with capable affair that was interesting and applicable to the pupil would take to a greater society. I think that both good and bad semen from John Dewey ‘s thoughts for instruction. First off, I like Dewey ‘s motion off from learning manners that stressed merely memorisation and the regurgitation of facts. Hands-on experience is a proved manner for pupils to larn. It is much more gratifying for the pupil and seems to be straight applicable to their hereafter. I besides agree with Dewey ‘s position that pupils should larn about something that involvements them. Stuffing facts that childs do non hold any desire to larn down their pharynxs is non good to anyone. When pupils can really link with the stuff they are larning, they are more likely to set in the clip and attempt that is necessary to to the full develop their cognition and apprehension of a topic. Lastly, I believe that it ‘s a good thought to concentrate your surveies in one peculiar country as it is really hard to get the hang a battalion of topics. I think it ‘s better to be highly adept in o ne topic than to hold an mean sum of cognition in multiple topics. This manner, everyone can pick an country of survey that involvements them and so, as a community, each individual can convey their one alone country of expertness to the tabular array and the remainder of the people that are n't as fluent in that topic can profit. With that being said, I think the preceding rules need to be applied in moderateness. While memorisation and repeat is non a perfect signifier of instruction, the consequences are difficult to reason with. I believe that there is something to be said for get the hanging a topic. For illustration, my major country of survey is accounting. It is one thing for me to acquire custodies on experience straight applicable to my major, but larning can non merely come through â€Å" playing † so to talk. I must first analyze all the foundational information that is out at that place. There are many people in the universe that are much more knowing on the topic than me and there are a batch of valuable things I can larn from them. Second, to be a successful comptroller, there are other nucleus topics that I must be competent in. For case, I need to be knowing in English to be able to pass on with my coworkers and I need to cognize math so I am able to calculate the expression required in accounting. There is a proved value in holding a rounded instruction. Learning about topics that may non straight use to your country of survey can profit you in many different ways. As an illustration, possibly it could sharpen your critical thought accomplishments. And on top of that, a pupil might believe they are non interested in a certain topic until they really take a category and larn about it. Hard work and long hours spent in the library-sometimes memorizing rules and formulas-is necessary for me to be a maestro of accounting, although I may non bask that work. To me, Dewey ‘s instruction system seems to promote jumping the chief class and traveling consecutive to dessert. I believe that I foremost need to get the hang the rules of accounting in order to merit a shooting of traveling out into the existent universe and really â€Å" making † accounting. Dewey stayed true to his matter-of-fact ideals by proving out his ain instruction theories in a real-life environment. He created what became to be known as his really ain â€Å" laboratory school. † Dewey ‘s school was radically different than any other of its clip. The pupils did non sit at desks and listen to a teacher talk or make homework jobs out of a text edition. Alternatively they would be traveling about the schoolroom making changing physical activities, such as run uping or cooking. As I stated earlier, Dewey believed that pupils could larn the critical accomplishments ( math and scientific discipline for illustration ) that they needed by making these types of activities alternatively of the more traditional â€Å" analyzing the text edition † method. The kids were broken down by age and every different age group was ever making something different. Dewey had the childs traveling on field trips, edifice theoretical accounts, moving out dramas, and pla ying games among many other â€Å" active † things. He preached that instructors should keep off on holding childs do things like reading and composing until the pupil found it necessary and appealing to make so ( Dewey Article, Enotes ) . Dewey ‘s school had its successes and failures and there is a batch that can be taken away his expansive â€Å" experiment. † While I do acknowledge that a batch of great instruction patterns were foremost developed at Dewey ‘s laboratory school, I can non assist but detect the cardinal defects that existed in it. If I was to use what Dewey showcased in his school to today ‘s universe of instruction, I think his system would neglect. The ground for this is first that Dewey seemed to be looking at instruction through â€Å" rose coloured spectacless † so to talk. In my sentiment, a theory on instruction should be able to use to any state of affairs. I think about what Dewey had put together in his school, where the place life was to a great extent incorporated into the category course of study. But, what about kids that come from broken places, as we see so frequently in today ‘s society? If a kid is being abused or enduring under the ticker of alcoholic parents, who could care less about their kid ‘s instruction, how would that suit into Dewey ‘s system? Dewey ‘s s chool would likely work good in a instance where a kid has really supportive parents that are highly interested in their kid ‘s instruction, but how frequently is that non the instance in today ‘s universe? Henry Perkinson, an writer and pedagogue at New York University, makes a remark about Dewey ‘s lab school stating, â€Å" Dewey ‘s educational doctrine depicts a school or school endeavor that ne'er existed and likely ne'er could be. To transport it out would necessitate superteachers and superstudents † ( Perkinson, ) . While I believe Dewey is taking instruction in the right way, I think he foremost needs to happen a manner to develop a theory on instruction that can use to each and every pupil. Another country that I merely ca n't hold with Dewey in is how he resorts to see as the primary manner for a pupil to larn. Without a uncertainty, I believe that his method of enquiry can add a batch to a pupil ‘s instruction. In his school, the childs were making so many astonishing things that I wish I could hold done in my old ages as a immature male child. But, looking at the large image, there seems to be so many things that a kid must larn over their life-time that they can non perchance detect and â€Å" make † everything. Yes, you can larn math when mensurating out the flour required to bake a bar, but can that signifier of math be applied to everything? There are other things out in the universe like mensurating liquids or numbering coins. How would one kid have the clip and the agencies to see every individual thing? I think that at some point, pupils will necessitate to utilize some signifier of memorisation of information or facts as a footing of cognition th at they can so utilize to larn about other things. A quotation mark from a parent that had a kid in Dewey ‘s school truly sums up this job stating, â€Å" We have to learn him how to analyze. He learned to ‘observe ‘ last twelvemonth † ( Storr, ) . I think that Dewey had the right thought, but he had everything backwards. First, the pupil should larn a foundation of cognition, from something like a text edition, and so they can travel out and experiment and use that cognition to existent mundane state of affairss. John Dewey was a great philosopher that made ground-breaking progresss in instruction. He was a adult male that practiced what he preached and for that I have great regard. I do like Dewey ‘s thoughts in doses. In the terminal, I think that a good balance of his â€Å" experiential acquisition † in combination with a disciplined survey of information and text edition is the best signifier of instruction. While his thoughts did hold their defects, the way that he took American instruction was for the better.

Christianity vs. Pagan Beliefs in Beowulf Essay

Although there are many examples of Pagan beliefs in the poem Beowulf, the poem points more toward a Christian influence and meaning. Beowulf is seen as a God to the Geat people, and they turn to the Almighty to save them from evil. Grendel is portrayed as a â€Å"monster of Cain† and lives underground. He represents the darkness of the Pagan beliefs, as well as Hell. The battle between good and evil – between Christianity and Pagan beliefs – is continued throughout the poem. Hrothgar and the Danes seem to be protected by the Almighty. Grendel would not go near Hrothgar’s throne because it was protected by God. When Hrothgar is talking to Beowulf before Beowulf goes to fight Grendel, he says, â€Å"Surely the Lord Almighty could stop his madness, smother his lust!† Beowulf also says that God will decide who dies. They believe in God and his power to control the outcome. Grendel was created after the Lord Almighty drove out all of the demons and the demons split into forms of evil, forever opposing the Lord’s Will. This would explain why Grendel was powered by the hatred of God. Whenever he terrorized Herot, some people turned to the Devil for help. They were heathens, and prayed to the old stone gods. Up until his battle with Beowulf, Grendel could kill his victims easily. However, Beowulf had the Lord on his side and was more powerful, easily killing Grendel. This proves that Christianity was more powerful than the Pagan beliefs. Grendel and his mother represent Pagan beliefs in the poem Beowulf. The main example is that they live underground, and the lake above their home was described as a â€Å"fiery flame†. This is just like Hell. Grendel is referred to as a â€Å"shepherd of evil, guardian of crime† in the poem. For twelve years Herot stands deserted because of the fear Grendel put in people. He represents all things evil and malicious. Towards the end of the battle between Beowulf and Grendel, the poem stated that you could hear shrieks of the Almighty’s enemy in the darkness. Grendel is also referred to as â€Å"hell’s captive† before he dies. This makes it seem like Grendel did not choose to be evil, evil chose him. All of the kennings refer to Grendel and are a part of Pagan beliefs. Grendel’s mother was the same way. Whenever she battled Beowulf, she could not be injured in her home. Her evil character was her shield. Then, the Holy God sent him victory and gave judgement for truth and right. When Grendel’s mother was also slain, there was a light as bright as Heaven’s own candle. Once again, Christianity overcomes Pagan beliefs. Beowulf often refers to fame and says that is all he wants. This is a Pagan belief. Wryd is also a Pagan belief and is talked about in the poem as well. Wryd means fate, and Beowulf believes that fate will determine who wins the battle. Although he believes in God and has confidence in His existence, he also has a few Pagan characteristics. One of these is greed. To Christians, greed is punishable by sin. Beowulf is extremely greedy for fame and fortune. He genuinely does want to save his people, but he wants them to remember his name more than that. Grendel and his mother often refer to revenge and the drinking of blood, which is also a Pagan belief. There has been much debate over whether the author of Beowulf meant for the poem to be a Christian poem, or was originally a Paganistic poem that has turned into a Christian story. There are many influences of both Pagan views and Christian views in the character of Beowulf. He is seen as a Paganistic superhero, but also as a god to the Geat people. Grendel and his mother are seen as monsters, but with human qualities, which is a Pagan view. However, the poem claims that God decided their fate and that is why they were slain. Therefore, the conflict between Pagan and Christianity beliefs is not really ever solved in the poem itself.

Journey to Manhood… An Analysis of “Do You Fear the Wind”

After reading â€Å"Do You Fear the Wind†, I immediately thought of a father talking to his son about becoming a man. This particular talk appears to focus on being strong, facing one's fears, and fighting one's own battles. The persona appears to be trying to educate someone on masculinity. There is an underlying theme of strength that is prominent throughout the poem. The poet, through language, imagery, and use of poetic metre, contributes to this theme by having the persona command the addressee to embrace his masculinity and â€Å"walk like a man†. Throughout the poem, the persona uses strong language when he is speaking. It is almost as if he wants to frighten his addressee. The comfortable atmosphere that is expected when one is at home talking to one's parents is not evident here. There are no soft gentle tones, or kind words of encouragement. Instead, there is this gruesome display of harsh, brutal language, and eccentric commands. It is almost frightening how the addressee is expected to obtain such warrior-like qualities in his quest for manhood. He is supposed to â€Å"slash†, â€Å"fight†, use â€Å"force†, and â€Å"be savage†. The poet, in his choice of words, inadvertently reveals his belief in the qualities that a ‘real man' should possess. The persona continues his harshness in the command, â€Å"Go wade like the crane.† It is difficult to imagine why someone would tell another person, under any circumstances, to â€Å"go wade like the crane†, but it is possible that the poet is alluding to the aggressive nature of the crane. The crane is a very intrepid bird with elaborate courting displays. Cranes are also known for their pride, as they fly with their necks outstretched rather than pulled back. The poet also uses vivid imagery throughout the poem to contribute to its theme. He creates a stormy atmosphere with the â€Å"force of the wind† and the â€Å"slash of the rain†. He, then, equates going â€Å"hungry and cold† with masculinity. The persona apparently associates being masculine with being a savage beast. Incidentally, he instructs the addressee to become animalistic and obtain certain qualities of a â€Å"wolf†. In order to be clearly understood, the persona informs the addressee that becoming a man will be no easy task. He will encounter obstacles along the way. There will be times when his â€Å"palms will thicken† and â€Å"the skin of his cheek will tan†. It is easy to picture a bloody, dirty, exhausted man returning from war in the line, â€Å"You'll grow ragged and weary and swarthy.† He may get battered and bruised, but he must persevere because the juice of this prize is worth the squeeze he must execute. The poet also contributes to the theme through his use of poetic metre. Unlike the flowery, feminine traits of iambic pentametre, common in sonnets, the poem consists of only dimetre (lines containing two feet) and trimetre (lines containing three feet). All of the lines in the poem are short and abrupt. The metre helps to create the sense of rigidity that is implied in the tone of the poem. Lines three and seven of the poem contain amphibrach foot. Amphibrach is a Greek word meaning short on either side. The poet suggests, through metric foot, that the addressee should not be cowardly, but fight back. All of the lines in the poem, with the exception of line three, contain anapestic foot. Anapest is a Greek word meaning struck back. The persona in the poem teaches a valuable lesson about embracing one's fears and subsequently overcoming them. Nothing is promised in life, and anything that is worth having is worth the struggle necessary to obtain it. It is important to understand that the challenge does not lie in never being in fear, but in learning that fear can be conquered. It will not always be easy and it may sometimes seem impossible. However challenging and tiring it may seem, one must persevere. The gratification one gets is summed up best in the lines, You'll grow ragged and weary and swarthy, But you'll walk like a man.

Starbucks Risk management items for this supplier global expansion Essay

Starbucks Risk management items for this supplier global expansion project and risk breakdown structure, which outlines the orga - Essay Example This writing analyses some of the risks, and risk management strategies employed by Starbuck due to adoption of global supply by Starbuck. Starbucks have always considered the nature of demand of their coffee thus using this as the base of selecting the best suppliers as a way of minimizing global supply risk. As much it may be hard to engage international supply because of many risks associated with the transaction, Starbuck went ahead and realized that risk and return are allied and therefore the more risky the business is, the higher the returns (Katrinli, Gunay & Biresselioglu, 2011). Starbuck is committed in her strong values of ensuring equal treatment of individuals both with respect and high degree of dignity as well as conservation of the environment and this applies to their supply chain. Supplier Code of conduct created by the company was driven by the need for their suppliers to embrace Starbuck’s values. This helps in reducing a lot of risks associated with global supply. Unless a global supplier adopts and strictly follows the Starbuck’s Coffee Sourcing Guidelines, they may not qualify as the preferred suppliers for the company (Berman, Christner & Bell, 2010). Starbuck normally communicates to her suppliers and letting them know about their Supplier Code of Conduct. a supplier must always show commitment to the welfare, economic sustainability, measuring, reporting and verify compliance to the Supplier code of conduct. Also, suppliers must adhere to the local laws and international labor and human rights standard as well as good businesses strategies that enhance environmental protection. The company may carry out an independent audit or just random audit to verify supplier’s compliance (Trent & Llewellyn, 2010). Relationship between Starbuck and her global suppliers of green coffee is so much established in such a manner that the risk of non-delivery on purchases is minimal. As a way of ensuring continuous production of high quality green coffee and leadership sustainability Starbucks empowers her international coffee producers. Furthermore, Starbuck purchases coffee either through the fixed price or price to be fixed purchase commitments dependent on the market conditions (Katrinli, Gunay & Biresselioglu, 2011). Global supply chain is exposed to risks compared to local supply chains because they are longer and complex. In that regard, there is probability of experiencing more uncertainties and challenges thus making information technology very relevant and useful for Starbuck. Information regarding risks such as legal setbacks, custom fees, taxes, political conflicts and cultural differences may be gotten from the newspapers, the internet and other media or through whistleblowing. Thorough coordination and understanding of suppliers’ information is very useful. Such kind of information sources may reflect political turmoil and perhaps currency depreciation and other activities showing that the company is not doing very well (Trent & Llewellyn, 2010). Financial statements of a particular supplier may also be used by Starbucks to assess the level of risk associated with dealing with the company in question. Also, Starbuck may hear from the public opinion or media various serious allegations such as poor environmental dealings and unfriendly labor laws practiced by their suppliers. This is enough information to reflect the activities and the supplier’s attributes. Furthermore, St

Influence of Diverse Culture on Change Term Paper

Influence of Diverse Culture on Change - Term Paper Example The paper tells that there are many changes that occur within organizations, changes that define current and future operations and their impact on company goals and objectives. Technological firms often undergo many changes because of the nature of their products and services. Since technology is a highly dynamic concept, it is vital to keep up with it to guarantee success. An example of a change in a technological organization is systems overhaul, which requires leadership and consensus. Systems are the core of technological and even non-technological organizations, and their status determines the success of current and future operations. Currently, most technological companies are developing ways of cultivating a more appealing image that allows them to connect with their customers in ways that improve their lives. Consequently, they focus on employees with different cultural attributes in order to cultivate a more socially relevant image. Culture and leadership are closely related . In fact, they are so closely related that they can be used interchangeably in some contexts. Some cultures have a gender biased outlook of leadership that affects the way the individuals belonging to those cultures perceive and practice leadership. In addition, some cultures hold that leadership comes with status; that any person with a senior position anywhere is automatically a leader. However wrong this may be, it affects leadership. Individuals often practice what they believe in, and it is generally defined by the beliefs and values instilled in them by their communities.

The Effects of Globalization on the Sultanate of Oman Economy, Society Essay

The Effects of Globalization on the Sultanate of Oman Economy, Society and Policy - Essay Example As the report stresses globalization is the current trend of the major countries joined within the process of development of the entire human society today based on the international trade. What globalization is actually based on is the ideal thought of making the entire human society operatively connected to each other through the development of worldwide economy. It could be observed that the most affected countries in this particular process are those that are most connected to their cultural standing and traditions as a country which has an identifiable status in the international sense. The main focus of this research shall be addressed on the different developments and adjustments that the sultanate system of Oman should and already have undergone for the sake of being able to cope up with the challenges of global trade. Through this research, deciphering the different effects of globalization in the different aspects of social, political and economic systems of the country. By doing so, it is expected that understanding globalization in a more balanced perspective shall be given way in this research. To be able to come up with a considerable result for this research, the researcher plans to handle the study through basing from the combined perspectives of other researchers in the field of understanding how the sultanate government of Oman tries to cope with a more liberalized system of economy in the world at present.

ELECTRICAL POWER GENERATION SYSTEM Assignment Example | Topics and Well Written Essays - 1000 words - 1

ELECTRICAL POWER GENERATION SYSTEM - Assignment Example There are interconnections undersea through to the Republic of Ireland (EirGrid), Isle of Man (Isle of Man to England Interconnector), Northern Ireland (HVDC Moyle), the Netherlands (BritNed), and northern France (HVDC Cross-Channel). The paper will start with the different types of grid interfaces, protection issues and short circuit change levels. Then the paper will discuss the electrical power design of the components involved in generation of the electricity. In most cases, the low scale generators are indirectly connected to the grid. The characteristics of operation and the technology of generation need the incorporation of some interfaces in between the grid of distribution and the generator. For instance, photovoltaic panel of solar produce direct current electricity and thus, converter based on the power electronics is needed in between the generator and the grid. In technologies like induction generator using wind or hydro, this generator is directly connected to the Alternating Current grid. In the interconnection of the distributed generation, protection is essential. Distribution network is configured in the radial form. In this radial form, the network has over current schemes of time graded protection. The connection of the Distribution Grid may change the present schemes of protection coordination. In case, this is ignored, the protection system may fail to work. The major issues with relation to the Distribution Grid interconnection are as follows: This is the major measure useful in coordinating between over current relays and the selection of current transformers, fuses, reclosers, circuit breaker. The characteristic of short circuit is the equivalence system impendence at the points of and in this way, shows the fault current level that is expected. The variation in the time of this faulty current is affected by the rotating machinery characteristics (Cete, 2010). The majority of

Principles of Operations Management by J.Heizer & B.Render Essay

Principles of Operations Management by J.Heizer & B.Render - Essay Example Creating an image thus refers to the process of determining the perception the organization seeks to influence on its different publics. The organization interacts differently with its different publics. Among the publics is its staff, the customers, shareholders and the media among others. The management of the organization must determine the perception that each of the groups have about its operations in order to maximize of profitability (Hill & Jones, 2011). In analyzing the importance and the process of image building, the author uses the metaphor of a porter who at the beginning of his crafting work has a piece of clay but must work and create a new product from the same. The porter therefore conceptualizes an idea and determines the best way of executing through an appropriate design. In the metaphor, the author sees managers as artisans and the strategies they use to approach the various organizational publics as their clay. Just as the porter some must they employ the most a ppropriate strategies to earn the organization the best reputation among every audience group in order to sustain the organization’s profitability objective. Strategy determination is most important; the managers must determine an appropriate strategy of executing a plan of action with the view of achieving a particular objective. The strategy is important to the artisan just as it is to the managers. The author of the article approaches the concept as a review of the organizations past performance and its plans for the future. In crafting a pot or nay other clay product, the craftsman will refer to his past works before infusing such thoughts with the future products. Using his past works as a reference to influence his current work, the porter thus creates a new product that best fits his objectives. The same scenario applies to managers who must make effective managerial decisions on an everyday basis. The decisions the managers make influence the public’s perceptio n about the organization. In doing this, the managers must therefore use their experiences at the organization. An analysis of past decisions provides managers with an effective and reliable reference points (Mintzberg, 1971). The managers thus refer to the outcomes of past decisions of the diverse publics the organization has before constructing a current decision, which must also reflect the organization’s future. While the future is always a gamble, the past on the contrary is concrete owing to the fact that the organization had previously experienced the same. The managers thus make decision using the past reactions of the same publics but project such reactions on the future. In case of desirable reactions, the organization must improve on such with the view of increasing the scope of the organization’s acceptance among its specific publics. In case of an undesirable reaction by a particular public, the managers must seek to redress such by employing effective fut ure decisions that best address all the points of weakness in the past decisions. The author asserts that managers must read the mind of the organization. In doing this, the manager must assume the position of the specific public and therefore work on strategies that are effective enough to address their particular concerns about the organization. The process is cumbersome but requires an equally effective market research. Marketing is a management role concerned with the determination, identification and the sustainment of the customer’s demands from the market. Marketers as managers thus rely on the quality of their market researches to determine the future productions of the organization. The same is the case with all other managers when determining the strategies of solving

Ethics in History Film Response Paper Essay Example | Topics and Well Written Essays - 750 words

Ethics in History Film Response Paper - Essay Example Much of the cast consists of Algerians. The film is available in three versions of different lengths: 120, 125 and 135 minutes respectively. This paper attempts to interpret the films political connotation in light of historical developments since the colonial period. Much of the film is a flashback of Ali, the Algerian Front de Liberation (FLN) leader. The flashback begins when the French generals corner him in 1957. Some three years before the French hunt him down, Ali was a mere thief who made the decision to be part of the secretive organization (FLN) with the hope that he could rescue Casbah from the atrocities of the colonial government. Pontecorvo goes to the roots of the liberation struggle and unearths the stringent measures that the French government resorted to in a bid to calm the situation before it reached a national scale. When Ali’s flashback is done with, the French murder generals him alongside other notorious FLN leaders. Thereafter, the film resumes a more general focus that eventually culminates in the independence declaration for the African nation in 1962. Imperialism has been a strange issue to most filmmakers. In fact, Pontecorvo did a great job to highlight some of the thorny questions surrounding Western colonialism in the Battle of Algiers. He paints out the picture of imperialism even as the West is fighting hard to eradicate terrorism and rebel tactics of indigenous people. Pontecorvo drives home the point that even though the French torturous operations earned them defeat against the Algerian rebels during the war, the rebels finally had the last laugh as the French could not hold on to the colony for long. This contrast raises the debate as to whether the use of violent means is effective enough to deal with acts of terrorism currently growing worldwide. The film should not be underrated because of its underlying implications. The United States is particularly on the limelight owing

Advertising and Experience Design Strategies Assignment

Advertising and Experience Design Strategies - Assignment Example Pepsi and Coca-Cola are both brand names for the most popular beverage drinks global soft drink enterprises operating within the beverage industry. The two companies have one thing in common; quenching the thirst of their target consumers and selling non-alcoholic beverages. Despite the two companies read on the same page as pertains to the use of young fellows in order to meet the promotional needs, Pepsi has steadily remained on a pathway that contrasts whatever Coke has been following. Overall, has been much into the use of emotional approach to fulfill in order to promote its products whereas Pepsi has stuck to music and entertainment. These two companies have used different marketing approaches. The basic marketing matrix has been integrated to include advertising, personal selling, sales promotion, public relations and direct marketing. The two products have been targeting the young generation in their adverts and slogans. The packaging of each product is set in a manner likely to attract the target market. Coca cola has maintained the red and white colours with the iconic font type on the name. Pepsi has white and red stripes with the name written in blue in the background. Coca Cola Company has gone a step further of identifying with other food products mainly chips (Bhasin, 2013). As much as the differences are distinct, many consumers lean towards the coca cola drink. Coca-Cola and Pepsi both used their official websites in the promotion of the recent products Coca-Cola Life and Pepsi true respectively. Interestingly, the promotional messages learnt in either case reflected the environmental market trends that the companies had learnt. One approach that surrounded the promotion of the two aforementioned products was the use of email-oriented newsletters to aid in customer registration. Mittal & Kamakura, (2013) posits that IMC

UK Foreign Holiday Market Essay Example | Topics and Well Written Essays - 1500 words

UK Foreign Holiday Market - Essay Example In the past few years, this market has grown at a modest rate of over 4% annually, with the significant consumer-groups in the market being families, youth, and the over-50 age group. However, the effects of global recession on this market are now gradually becoming evident. The demand for foreign holidays fell by around 15% in January, 2009 alone as the credit crunch tightened its grip on the UK economy (Devine, D 2009). A lack of consumer confidence and rising fuel prices have also recently added in, further dampening the demand. In addition, the unpredictability of British weather due to global warming, and a failure on the part of UK holiday-resorts to match services in terms of price and quality with that of their foreign competitors (Research and Markets 2007) have lowered the demand for UK holidays by foreign tourists. The overall effect is that the demand-curve for the market has shifted leftwards. Other factors like the threat of terrorism, war, and natural disasters in current years have also contributed to the left-shift of the curve, thereby resulting in lesser quantity being demanded at a lesser price in the market. However, the economic gloom does have a bright side for this market. The airline industry has been badly hit by the crunch due to which almost all air-fares have been dramatically reduced. Consequently, consumers are able to book cheap flights to almost anywhere in the world, and the overall package cost of foreign holidays has decreased. There has been an increase in demand for trips to Spain and Mediterranean shores - which surveys have pointed out as favourite holiday destinations - by the British (Holiday Watchdog 2008). This reduction in total price of the product has resulted in a downward movement of the market equilibrium point along the demand-curve. Moreover, cheaper flights also mean that UK has become more available internationally to foreign tourists, since they can now afford air-travel for leisure purposes. The fierce competition between Airbus and Boeing has created an over-capacity of aircraft, and is expected to result in an explosion of discount carriers offering flights at affordable prices. Thus, there has been an increase in the quantity demanded. The ocean cruise market, which is a complement of the overseas holiday market, is expected to reach 1.5 million annual passengers by the year 2010 (Travel Weekly 2005). This high growth prediction means that its complements (like the foreign holiday market) will also consequently grow. Also, surveys by the Confederation of Public Transport have shown that a very high priority is attached by British to the annual holiday as an item of family expenditure due to changes in consumer attitude and lifestyle over modern times (Scottish Tourist Board, et al 2006). Thus, the economic downturn has not put off the British from taking foreign holidays. On the contrary, the current poor weather in the UK has helped the tourism industry by encouraging even more people to go abroad for the summer, particularly to places that "offer consistently good weather" (Property Wire 2008). Infact, psychologically speaking, the British are more eager than ever to go on a holiday in this potentially depressing situation since one way they believe "to escape the current economic gloom is to take a foreign holiday" (Property Wire 2008). Being now considered as an annual necessity rather than a luxury, the

Returning to College Essay Example for Free

Returning to College Essay At the beginning of 2013 I had a discussion with my co worker about returning back to school, and the I was indecisive on what I wanted to major in. So she suggested that I do online courses, and major in Organizational Management since I wanted to become a manager within the company I am currently employed. She referred me to Ashford University, and I must say that I am very happy that she referred me to this university because it works perfectly with my work schedule. In 2002 I was accepted into Lemoyne Owens University back in Memphis,  Tennessee to major in Child Development and Education because I wanted to be a elementary school teacher. I did not attend the university because the university wanted my parents to pay more in tuition than what they were offering me in Financial Aid. At the time student loans was not an option for me for I decided to attend a Junior College instead. My first year and a half at Laney Junior College I took cosmetology classes because Laney did not offer Child Development courses and the other junior colleges classes were full. I graduated with my Associates Degree in Cosmetology in 2004, and  returned to receive my Associates Degree in Business Administration. Although I started off taking business courses I ended up switching my major to receive my Associates Degree in Liberal Arts, because it would have taken 3 years to receive my degree in business admin. Once I graduated in 2006 with my Liberal Arts degree I decided not to go back to school after that although I wanted to. I decided to put all of my effort into my 3 job, until 7 years down the line one of my co workers who is also a student at Ashford University convinced me to return to school to get my Bachelor’s Degree. Returning back to school was frequently on my mind but I did not know how to fit it in with my busy work schedule, and I felt that my writing skills were not up to the college level like they should be. Obtaining a higher degree is very important to me because it can possibly help me in the long run career wise. I would love to own my own business some day, particularly my own day care center. I also would like to be an accountant and possibly have my own accounting business. There are times that I feel that my job gets in the way of me completing my school work. So I try to set time aside each day to complete at least one discussion each day and try to complete my assignments and responses over the weekend. There are things that tend to get in the way of those plans so I just end up staying up late to complete my work. I try my hardest not to let any obstacles get in my way but I can’t predict my life and each step as much as I wish that I could. I plan on graduating next year with my Bachelor’s in Organizational Management and then try to obtain my degree in Accounting. Returning back to school has so far been one of my best life decisions thus.

Project procurement and risk management

Project procurement and risk management PROJECT PROCUREMENT AND RÄ °SK INTRODUCTION The management of the processes of purchasing or acquiring the services ,products or results needed from outside the project team to perform the work is defined as project procurement management or the processes to purchase/acquire products, services and results from outside the project. The main actors are†The Buyer† and the†The Seller† and central is the contractual obligations and regulations.Central is also how the purchasing process within the project is structured, with formal approvals and routines[16].In procurement process we have to consider the Business aspect,financial aspect,routines,instructions,investment aspect,subcontracting and every step in procurement will need its own tools Risk analysis,Investment calculus,vendor evaluation,quality assurance,specification determination,contract forms. 1. SPECIFICATION OF PLACE AND SIZE OF THE PROJECT. 1.1 NEW PROJECT OF GW For the first and second assignment, our company hasnt had any specific project. We only made the scope analysis, management plan, policy, stakeholder analysis, organizational chart within the subjects of Project Management, Quality, Human Resources, and Communication Management.(1,2) For the third assignment, The Company GW has a current project, which is now on going. We have been ordered to make a solar thermal power plant to the area of desert of Arizona, United States. The ordered is made by the United State Government. There should be installed a solar thermal power plant to be built in 5 years. The target of this plant is to generate 275MW energy per year. The energy gained from the solar power, will be used in order to meet the electricity need of the towns that are the closest ones to the solar power. According to the assumption, if 1 average roof is capable to be built 20 solar panels on it, it is expected that this amount of solar energy will meet the electricity needs of approximately 40000 building such as home, school, businesses, and public buildings. The usage of renewable energy will definitely provide the United State Government to make a reasonable profit. Since it doesnt cause any pollution, there will be generated a new perspective for environ mental aspects, and it will repay its installation cost in a short period of time. 2. MAKE A STAKEHOLDER ANALYSÄ °S FOR YOUR PROJECT 2.1 STAKEHOLDER ANALYSIS When we were making the scope analysis of GW, in Assignment I, we already mentioned that, stakeholders are any group, party, organization or people, that somehow plays a role within the whole project. They affect or are affected by the actions that the organization performs. Stakeholder analysis identifies the stakeholders and their interests, defines their roles and related responsibilities and specifies whether, and to what extent, their expectations are treated as requirement in the project [3,4,5]. 3. AN INVESTIGATION OF THE AREA OF DESERT OF ARIZONA IN MIND DUE TO RESOURCES (MAPS AND GEOGRAPHICAL INFORMATION) As we have discussed in our scope analysis, as The Company of GW, our main objective is to set up high quality and efficient solar power plants with a reasonable cost. Since we are also aware of keeping the harmonious balance of energy, one of our aims is also to compensate the energy need by providing the environmental protection to keep the earth green. In order to have a high efficient plant with a high quality, it is quite crucial to pay attention at which the installation will be done. Because the available resources play the most important role, after setting up a plant, in terms of efficiency. Efficiency for a plant can be found by the formula; desired output / required input. This formula can also be explained verbally; the highest efficiency we can get from a plan is 100% that is equal to 1 for this formula, which is impossible to obtain for the real life since we cannot have the ideal conditions. But in order to increase the efficiency to approach to zero, by a simple mathematics, we can say that, we need to keep the output higher as much as we can, while decreasing the input value. How we can decrease the required input value to nearly zero is by utilizing the natural resources as well as we can, which is the solar energy for our case. Therefore, it is very important to build up new plants to the regions, where there can be found high temperature and more sunny days available. Therefore, deserts take the first place in the ranking, when it needs to make a prioritizing. There is also one advantage that deserts can be used as a land for solar power systems, because there is no need any environmental impact such as lake (as it is needed for hydroelectric dams), or coal plants. There are also many advantages to install the plants in the United States as the land; * United States is the leader for the power research and development. * It is one of only two countries in the world that has the largest scale of solar power. * Since Arizona is located in the southwest of US, the feature of warm and sunny climate makes the desert of Arizona more favorable location for solar power. * This solar power plant not only reserved by the people live around it, but also affects some other people by rebates and tax credits. As it is also explained in the website of Department of Energy of United States ; â€Å"Specific federal and state tax laws permit private companies and homeowners to credit the purchase price of their solar power systems against their annual income tax payment.†[6,7] 4. LIST OF ITEMS NEEDED GW needs to identify the needed goods and services. This should be identified according to GWs organization chart and procurement plan. After identifying the needed goods and services, the suppliers which will successfully fulfill the contracts and supply good and services, should be found. The suppliers should be chosen according to their technical capability, experience and human resource capability. Here is a list of needed items and services for GW: Materials Services  § Office Equipment  § Rental Cars  § Meeting Rooms  § Restaurant/Cafeteria  § Security Stuff  § Computer Services  § Cleaning Supplies  § Tax Services  § Insurance Services  § Electric Services  § Heating Services  § Air Condition Services  § Building Repair Services  § Telecommunication Services  § Transport Services  § Treatment of Office Materials Service  § Education Services (for personnel trainings)  § Scientific and Technological Services (for industrial analysis, researches)  § Food and Drink Provider Service  § Security Service Table 2: List of item needed As we see in the table, most of the services and materials are the basic needs of company. These are not changeable according to the projects. According to the project, the use of these items may change. Also the needed items list has to be renewable all the time. The departments may need new items during the projects. Then these items should be added to the list. It means that this list can change in every phase of the project but as it is mentioned before, most of these items will be kept as basic needs. If new items would be identified in later phases of projects, the list can be detailed.[8,9] 5. MAKE OR BUY DECISION The act of making choice between producing an item (in -house ) Internallay or buying it from external source (Supplier) is make-or-buy decision. Make-or-buy decisions arises usually when a company has developed a product or modified a product or having trouble with current supplier or changing demand of the product. Make-or-buy decisions also occur at the operational level. Analysis suggest the following considerations that are in favor of making a part in-house (1) * The considerations of cost * To integrate the plant operations * The Productive utalisation of excess the plant capacity * The Need of direct control over production and/or quality * The Better quality control system * To protect Proprietary technology design. * Unreliable suppliers,No competent suppliers * Desire to maintain a stable workforce (in periods of declining sales) * The too small Quality to interest a supplier * lead time Controle , warehousing and transportation, costs * Greater assurance of continious supply. * Provision of a secondary source * The Political, environmental or social reasons. Some of the factors which influence may be on the firms to buy a part externally include: * Lacklessness of expertise,Suppliers research and specialized know-how exceeds that of the buyer * Consideration of cost. * Low-volume requirements. * Facilities of limited production or insufficient capacity * Strong desire of maintaining a multiple-source policy * The Indirect managerial control considerations. * Considerations of Procurement and inventory. * Preference Brand * Those Item which are not essential to the firms strategy There are two most important points to consider in a make-or-buy decision are and the availability of production capacity the cost . Obviously, the firm who buy will compare production and purchase costs.It provide the major elements included in this comparison. Elements of the â€Å"make† analysis include: * Carrying costs. * The direct labor costs. * Factory overhead costs * Purchased material costs which is delivered * Managerial costs. * Any other costs stemming from the quality and related problems. * Increasing purchasing costs, Increasing capital costs. Cost considerations for the â€Å"buy† analysis include: * Purchasing price,and transportation costs of the items. * Ä °nspection and reception costs. * The Incremental purchasing costs. * Any of the costs which is related to quality or service. 6. RISK ANALYSÄ °S (RA) FOR SOLAR THERMAL POWER PLANT TO THE AREA OF DESERT OF ARIZONA 6.1 SOCIAL AND ECONOMIC RISK OF SOLAR THERMAL The Desert of Arizona solar boom will impact social and economic dimensions of the region. Nearby residents and visitors will face the burden of increased traffic, pollution, noise, and infrastructure that will diminish the aesthetic qualities of the desert. A fringe impact of solar parks is increased land prices caused by growing demand from private industry. Economically, solar thermal parks will produce manufacturing and construction jobs. These jobs could provide more revenue for the surrounding community, increased investment in the local economy, and a larger tax base.[11,12] 6.2 RISK OF SOLAR THERMAL ON VEGETATION, WILDLIFE, AND WATER The Desert of Arizona is home diverse species and ecosystems, and large solar parks could be physical stressors on these desert systems. Considering the fragility, diversity, and complexity of the Desert of Arizona, large solar thermal parks could disrupt healthy ecosystems and augment pressures on already stressed species .Limited water supplies also complicate the benefits of solar thermal. 6.3 RISK OF SOLAR THERMAL ON DESERT SOIL ECOSYSTEMS: ASSESSMENT ENDPOINT The Desert of Arizona has recently caught the attention of scientists because of its ancient origins and carbon sequestration capabilities. Made up of sedimentary, igneous, and metamorphic rocks. The recent scientific literature regarding carbon sequestration in deserts is both new and solar power is perceived as a ‘clean energy source, reducing carbon production while providing much-needed energy. The production capabilities in Desert of Arizona could supply with most of its energy needs. Therefore, the goal of this project is to determine whether the installation and operation of solar thermal plants will impact carbon sequestration capabilities of the Desert of Arizona ecosystem and ecosystem services to the extent that more carbon is released or inhibited from being stored than saved while utilizing solar technology.[13] 6.4 QUALITATIVE RISK ANALYSIS: POSSIBLE EFFECTS OF SOLAR THERMAL PLANTS ON THE DESERT OF ARIZONA It is clear that the desert ecosystem will be disturbed and destroyed during the installation of the Concentrating Solar Power (CSP) plants in the Desert of Arizona. However, it is unclear, and therefore our primary question for this analysis, whether the sum gain of carbon saved by building and operating new solar thermal plants rather than operating fossil fuel power plants is greater than the sum loss of carbon that occurs when the desert habitat is disturbed and destroyed, thus altering the carbon sequestration abilities of the ecosystem. We approached this analysis in both a qualitative and quantitative manner. We will first describe the descriptive analysis of the risks associated with installation and operation of the CSP plants, followed by the quantitative approach of applying a cost-benefit analysis to compare net carbon gains by using CSP plants rather than an Integrated Gasification Combined Cycle (ICGG) plant, which uses â€Å"clean coal† technology.[14] 7. RA WHAT TO DO IF THE RISK OCCURS ? 7.1 CARBON LOSS DUE TO INSTALLATÄ °ON OF SOLAR THERMAL POWER PLANTS Carbon sequestration is thought to occur on a variety of levels within desert and semi-arid ecosystems. The primary stressor in this analysis is the physical destruction of the habitat that will occur with the installation of the solar collecting facilities, roads, and transmission lines or towers. While CSP plants are large, some estimate they use less land area than hydroelectric dams or coal plants. Nonetheless, existing vegetation, including the aboveground biomass and belowground plant tissue and roots will be cleared prior to installation of CSP plants. Additionally, it is assumed that biological soil crusts will be destroyed and alkaline soils will be removed during the CSP installation process, especially if land leveling, contouring, and construction of stabilizing features for high desert winds are needed. While the soil may only be displaced and later deposited in other desert areas, we assumed the stored carbon was released into the atmosphere. This may be an overstatemen t of the potential effect; however, we decided to assume the scenario causing the greatest impact given the limited available information. 7.2 LOSS OF FUTURE CARBON SEQUESTRATION WITH THE OPERATION OF SOLAR THERMAL POWER PLANTS In addition to the loss of stored carbon, the CSP facility and supporting infrastructure will likely inhibit the future sequestration of carbon across the inhabited area. Some researchers such as Schlesinger are skeptical of the high flux rates especially given the lack of information to support where the carbon is stored and whether carbon sequestration within desert biomes has increased since the Industrial Revolution. However, if these desert ecosystems do sequester large carbon pools, then large alterations of the ecosystem will likely result in the loss of future sequestration capabilities for the global carbon budget. 7.3 OTHER POTENTIAL IMPACTS AS A RESULT OF INSTALLATÄ °ON AND OPERATÄ °ON OF SOLAR THERMAL POWER PLANTS Although the majority of this analysis has characterized solar thermal as a physical stressor, CSP plants also pose chemical risks. CSP plants may use molten salts to store the thermal energy and these oxidizing salts may pose both health and ecological risks. Furthermore, impacts will occur on water supplies and resources, as water is piped from limited aquatic systems; Desert of Arizona, some of which may have declining populations; and nearby human communities. These impacts were not evaluated in this risk analysis but should be considered in a more comprehensive evaluation. 7.4 QUANTITATIVE RA/ COST BENEFIT ANALYSIS The objective of this cost benefit analysis is to weigh the possible costs of building a solar thermal plant in the Desert of Arizona. The scope of this cost benefit analysis will be limited to solar thermal plants located in Desert of Arizona, and the currency used will be carbon. It is important to note that these values are estimates and the quantitative analysis is limited to carbon. In a comprehensive risk assessment, a full ecological cost benefit analysis would be conducted in order to measure the true costs of a solar thermal plant. Other parameters that would be considered include impacts on the Desert of Arizona of the region, water resources, social and economic implications and land costs. Carbon costs of construction and operation of the solar thermal plant were calculated based on a review of the primary literature. Carbon released from disruption of Desert of Arizona soil, construction of the solar thermal plant, and disruption of carbon sequestration capabilities were considered in the evaluation. [15] 8. RISK MANAGEMENT PROCESS FLOWCHART CONCLUSION In this paper we define and implement the project procurement and risk management for our green show project,we specify the place and size of our project and also analysis of stackholders were made .We also investigate the area due to resources and geographical information .A list of items like systems ,services and materials etc was made and finally we also perform make or buy decisions for the items.Both types of qualatative and quantitative risk analysis was also made.We present a risk management plane in the form of flow chart with roles and resposibilities.We come to a point that project procrutment and risk management is the most important area of project management. REFERENCES [1] http://www.jasolar.com/ [2] http://michaelbluejay.com/sri/solar.html [3] http://maps.google.com/ [4] http://news.mongabay.com/2006/0209-solar.html [5] http://news.mongabay.com/2006/0113-energy.html [6] http://news.discovery.com/tech/ten-places-harness-solar.html [7] http://en.wikipedia.org/wiki/Solar_power_plants_in_the_Mojave_Desert [8] http://xeno.ipaustralia.gov.au/tmgoods.htm [9] http://www.treasury.gov.lk/FPPFM/pfd/circulars/NPACircular11.pdf 10) http://www.enotes.com/management-encyclopedia/make-buy-decision [11] SOLAR THERMAL IN THE MOJAVE DESERT, 13 March 2009. [12] http://en.wikipedia.org/wiki/Solar_power_plants_in_the_Mojave_Desert [13] http://www.aps.com/ [14] http://en.wikipedia.org/wiki/Solar_Energy_Generating_Systems [15] Financing Solar Thermal Power Plants, Rainer Kistner and Henry W. Price, April 1999. [16] Erika Lecture notes

X Ray Production And Interaction With Matter Engineering Essay

X Ray Production And Interaction With Matter Engineering Essay The x-ray tube is the most important part of the x-ray machine because the tube is where the x-rays are actually produced. The production of x-rays requires a rapidly moving stream of electrons that are suddenly decelerated or stopped. (C., Andy, 2008). Basically this means that when fast-moving electrons slam into a metal object x-rays are produced. (Bushong, 2008, Ch.6 p.101). Inside of the x-ray tube are three main factors that play important roles in x-ray production: 1.) The cathode 2.) The anode 3.) The vacuum The cathode and anode are basically the only components that help in the production of x-rays. The cathode or also known as the fast-moving electrons is a negatively charged electrode that contains a focusing cup and a filament. The focusing cup is made of nickel or molybdenum and nearly surrounds the filament. It is open at one end to allow electrons to flow freely across the tube from the cathode to the anode. (Fauber, 2009, p.15). It has a negative charge, which keeps the electrons emitted from the filament spreading apart. The focusing cups purpose is to focus the stream of fast-moving electrons. The filament is coil of wire (about 2mm diameter and 1 to 2cm long) that emits the electrons when it is heated. When the current through the filament is sufficiently high, the outer-shell electrons of the filament atoms are boiled off and ejected. (Bushong, 2008, Ch.7 p.122). This is also referred to as thermionic emission. The Anode The positively charged electrode of the tube is called the anode. It consists of a stator, rotor, and a target. The stator is an electric motor that turns the rotor at very high speeds. These speeds range from 3,000 to 10,000 revolutions per minute (RPM). The rotor is rigidly connected to the target through the anode stem, causing the target to rotate rapidly during x-ray production. High Strength ball bearings in the rotor allow it to rotate smoothly at high speeds. (Fauber, 2009, p.17). The last component of the anode is the target. The target is the metal object that is struck by the focused stream of electrons coming from the cathode. The target then stops the fast-moving electrons and thus creates the opportunity for the production of x-rays. (Nave, 2006, http://hyperphysics.phyastr.gsu.edu/Hbase/quantum/xtube.html) The Vacuum Another contributing factor called a vacuum, which allows for more efficient x-ray production and longer tube life. However, if there is just a little gas is inside the tube, the electron flow from the cathode to the anode is reduced, fewer x-rays are produced, and more heat is generated. If there is too much gas, x-ray production falls and the tube can fail. (Bushong, 2008, Ch.7 p.122). This is why the radiographer needs to be aware of the amount of heat that is produced during x-ray production because excessive heat can damage the tube: and without the tube x-ray production cannot be created. X-ray Interaction with Matter If x-ray production falls, then x-rays cannot interact with matter. X-ray production and x-ray interaction with matter help to form an image. X-rays interact with matter in five different characteristics: 1.) Coherent Scattering 2.) Compton Effect 3.) Photoelectric Effect 4.) Pair Production 5.) Photodistegration Only the Compton effect and the photoelectric effect are important in the process of creating an x-ray image. Coherent Scattering Coherent scattering is an interaction with low energy x-rays, below the diagnostic range. The incoming photon interacts with the atom causing it to become excited. Fauber (2009, Ch.3 p.49) has suggested that the x-ray doesnt lose energy, but changes direction. Coherent scattering contributes very little to the x-ray image, and only a few percent undergo this type of scatter. Coherent scatter contributes slightly to the deterioration of the image, often referred to as image noise, the general graying of an image that reduces image contrast. Most coherent scattered x-rays are emitted in a forward direction. Coherent scattering is a small importance to creating an x-ray image. However, if these scattered photons are absorbed within the tissue, they do contribute to the radiation exposure to the patient. Compton Effect The Compton effect can occur in all x-ray energies and are very important interaction with matter. When scattered x-rays interact with an outer-shell electron, the electron is thrown or ejected from the atom and the atom becomes ionized. The electron that was ejected is called a secondary electron. With the secondary electron ejected the x-ray scatter continues in a different direction with less energy then it started out with. During a Compton interaction the scattered x-ray and secondary electron have divided the energy between them, but usually the scattered x-ray maintains most of it. Eventually both lose all their energy and the scattered x-ray is absorbed photo electrically, while the secondary electron loses all of its energy through ionization and then falls into a vacancy in the electron shell created by a previous ionizing event. The purpose of the Compton effect is to reduce as much contrast on the x-ray image. Photoelectric Effect The photoelectric effect takes place when the incident x-ray is not scattered, but is totally absorbed during the ionization of an inner-shell electron. The incident photon disappears, and the k-shell electron; called a photoelectron is ejected from the atom. The x-ray image results from the difference between those x-rays that are absorbed by photoelectric interaction and those x-rays that are absorbed during ionization through the body as image-forming x-rays. Pair production Pair production is explained by Bushong (2008, Ch.10 pg.168) as an incident x-ray that has sufficient energy; it may escape interaction with electrons and come close enough to the nucleus of the atom to be influenced by the strong nuclear force field. This causes the x-ray to disappear between the nuclear field and x-ray, and in its place forms two electrons: a positron (positively charged) and one that is negatively charged. Pair production interacts with matter, but does not occur during x-ray imaging. Photodistegration The last characteristic of x-ray interaction with matter is Photodistegration, although it does not occur is diagnostic radiology. This process by which very high-energy x-rays (approximately reaching above 10 MeV) can escape interaction with electrons and the nuclear electric field, and can be absorbed directly by the nucleus. When this occurs the nucleus is raised to an excited state and instantly emits a nucleon or other nuclear fragments, which are released. (Bushong, 2008, Ch.10 pg169). Conclusion In conclusion x-ray production and x-ray interaction with matter help to create an x-ray image. Without both basic concepts a simple image would not be possible. Two of the three components that make up the inside of an x-ray tube is: the cathode and anode, which are both important factors in x-ray production. Similar to the five ways an x-ray can interact with matter, only two are important to the formation: the Compton effect and the photoelectric effect. X-ray production and x-ray are different in so many ways, also they go hand in hand, but without one the other does not exist and without either diagnostic imaging cannot occur.

Methods of Social Investigation :: essays research papers fc

Methods of Social Investigation Emma Woodmansee 'Describe how you would plan and undertake an investigation into why some of this College's students do not complete their degree courses.' (You have been given only 100 to finance the study; and one term's sabbatical.) Define the variables in the given title After a Research Statement has been formulated it is very important that the researcher defines any variables within it. A variable is any word whose meaning may be ambiguous or which could have several different meanings. This is a crucial stage in the planning process as a vague title renders any results at the end of the research without true meaning. In this case, the Research Statement is the given title ‘Describe how you would plan and undertake an investigation into why some of this College's students do not complete their degree courses.' Within this Research Statement there are several variables : ‘college's', ‘students', ‘complete' and ‘degree courses'. These variables will be defined as follows: `College's' We will take this to mean students at Royal Holloway and Bedford New College, University of London. `Students' Undergraduates on a first degree (excluding post graduates and so on). `Complete' Graduate `Degree courses' The course for which the student originally registered. By defining the variables above there can be no confusion as to the meaning of the Research Statement. This process also helps the researcher to focus on the group of people that he wishes to study. Decide on the purpose of the research Having defined the variables in the Research Statement, the researcher now needs to focus his attention on the purpose of the research, and consequently lay down the Research Objectives. This part of the planning process allows the researcher time to consider what he hopes to achieve from the research and ensures that the research represents his objectives. The purpose of our research is to identify the reasons for students failing to complete the degree course for which they were originally admitted (variables already identified). The results of the research would allow the college to take action to encourage students to continue their studies and could even be used to aid the selection process and perhaps prevent problems from the outset. This is the final purpose of the research. Who is to be studied The researcher needs to identify the group of people upon which to base the study. The process is made easier by the fact that we have already defined the variables in the Research Statement. The research group has been thus so far defined as those students of Royal Holloway and Bedford New College, University of London who did not graduate from the first degree course for which they

Treatment :: essays research papers

  Ã‚  Ã‚  Ã‚  Ã‚  The main character is Janine Starr. She is overly shy, a bookworm, and an extremely religious Christian; however, she is an undercover cop. She works for the New York Police Department. In order for her to be promoted to a â€Å"detective† she has to work at a local strip joint, â€Å"ChiChi’s,† on West 8th Street. The reason for her to work at ChiChi’s is to bust the city’s top drug tycoon, Miguel Martinez.   Ã‚  Ã‚  Ã‚  Ã‚  Our other main character is Barry Johnson who is senior detective at the station. Starr does not know of Johnson. Johnson’s front is a cage cleaner at The Bronx Zoo. Johnson is keeping an eye on Starr because Johnson works on the side with Martinez; Johnson is betraying the department. Johnson moved next door to Starr and he pretends to be mentally challenged and in love with Starr. He watches her nightly at the club, yet she only notices him around the elevator—here or there. She has never seen him at the department or at the club.   Ã‚  Ã‚  Ã‚  Ã‚  Starr is very attractive, early to mid-twenties. She has medium brown hair, blue eyes, roughly 5’8†. A Tiffany-Amber Theissan type of look. Starr has the opportunity to be promoted to detective at her age because her father is a retired Commissioner. Starr hates working in the strip joint because she is religious. Our comic relief is a cross made out of black leather that she carries around. They chose Starr because she needed initiation for detective (she needed to do REAL detective work), and she was the best-looking female on the force.   Ã‚  Ã‚  Ã‚  Ã‚  Johnson is also early to mid-twenties. He became senior detective at the department because he is extremely intelligent, a Doogie Howser if you will. Though computers are not big because the year is 1978, he secretly is a computer genius. Johnson is a partner with Martinez; Johnson is not only the brain of the operation, but he is the cover because of the department. The department thinks Johnson is working at the zoo because of some animal-raids that have been going on. People have been breaking into zoos and injecting animals with virulent chemicals. Johnson is really working in the zoo as the cover for Starr, remember that while he is at the zoo he is pretending to be mentally challenged.   Ã‚  Ã‚  Ã‚  Ã‚  Martinez is the biggest drug tycoon in the city. They estimate he deals with approximately $20 million worth of drugs daily.

The Bicycles Changed America Essay -- Exploratory Essays Research Pape

The Bicycles Changed America The great changes in American society that came with the introduction bicycle in the late 19th century are often overshadowed by the influence of the automobile in the following decades. Today, bicycles are often seen as an alternative mode of transportation - a cleaner and more environmentally conscious form of travel. Because of this, it may be difficult to realize the incredible modernizing effects that bicycles had on American society when they were first introduced. Manufacturing and marketing techniques introduced by the bicycle industry were massive steps towards modern industrial practices. In addition, by making individual travel available to many people for the first time, bicycles changed the speed at which life flowed in much of America. Bicycles granted a degree of personal freedom of mobility to many for the first time, and their effect on the women's rights movement of the time was notable. Bicycles were used in war, by police, and by the postal service, among others. In countless walks of life, the availability of personal travel offered by bicycles had an incredible impact on American society. According to Robert Smith, the history of the bicycle goes like this: in the late 18th century and early 19th century, a two-wheeled vehicle with a wooden frame and a saddle, known as the celeripede ("fast feet") was developed in France. The celeripede had a fixed cross-bar and no pedals, meaning that it could not be steered very well and it was moved by running along the ground while straddling the saddle. Needless to say, it never became popular. Around the same time in Germany, Baron Karl von Drais de Savebrun developed a similar machine, with the difference that his had handle-bars... ...cle caused a massive change in both manufacturing and marketing in America. Bicycles represented a great increase in the speed of life and in the travel options of individuals. Perhaps it is because of their current position in our society as an alternative mode of travel that it is often difficult to imagine what a difference they made on modern life. Sources Cited: Botkin, Nancy. "Women on Wheels: Riding the Freedom Machine." 2003. http://www.sfbike.org/OLD_site/www/news/html/2000/march/01march2000.html Maree, D.R. "Bicycles in the Anglo-Boer War of 1899-1902." 2003. http://www.rapidttp.com/milhist/vol041dm.html Sherr, Lynn. "Failure is Impossible: Susan B. Anthony in Her Own Words." New York: Random House Inc. 1995 pp 277 Smith, Robert A. "A Social History of the Bicycle: Its Early Life and Times in America." New York: American Heritage Press. 1972

Software Development Outsourcing

Outsourcing is an arrangement in which one company provides services for another company that could also be or usually have been provided in-house. Nowadays, outsourcing is a trend in a competitive software development and it is expanding all over the world. Software development is very much suitable for the better working of a company. This means that another company is hired to do the task of software development. Outsourcing the software development projects can be advantageous, but sometimes if it is incorrectly executed, it can result to unusable projects. In this article, let's see some of its advantages and disadvantages. The advantages of Software Development Outsourcing: Cost efficiency – companies don't have to worry about buying expensive software and hardware. Software development technology indulge it. Lower Training cost – it is very expensive thing to give trainings to the new employees. Normally, three or more days are consumed. So, by hiring services from a software outsourcing company, the time and efforts are saved. Time – due to strict time line of some software projects, it is become required to outsource a component of software development projects in order to meet the time demand of the projects. Software companies take credit of immediate pool of skilled developers. Skills – in a situation like software companies outsource, sometimes need a skilled personnel for software development technologies. The disadvantages of Software Development Outsourcing: Disappointment – companies can produce code of a poor quality. It involves here who will be the responsible for maintaining the code or project. Need of Constant Management – one of the main reason why projects fail because there is no good manager. A leader who is in constant communication to the clients and also understands the needs or requirements of the clients. Testing is more difficult – generally, testing phase is the most difficult stage in system's development life cycle. You will undergo more testing cases. If you test a piece of software that was developed in an offshore in-house and find a problem, so there's a need to communicate to the offshore vendor. This could cause problems because the offshore vendor might not be able to propagate the problem. It could possibly easy to fix the problem if they could see the machine. Or maybe the problem is not properly communicated. These are the different advantages and disadvantages of software development outsourcing.

Miss Johnson in “Going to the Moon”

shed Johnson in Going to the Moon Many authors make use of figureisations as a device in their texts. In Going to the Moon, by Nina Ricci, symbolism is used to illuminate the themes and post a deeper meaning to the of a sudden story. The instructor in the soon story, vault Johnson is the nigh substantial symbol. exaltedtail it Johnson is a undeniable symbol because she represents important themes throughout, including the connection between the teller and his peers, accept for the fibber and word meaning of the fabricator. dismiss Johnson represents the single connection that the storyteller and his peers administer, providing a sense of security for the son to void humiliation and teasing. The narrator and his classmates both share a deep neck for recede Johnson I matt-up protected in that common love, in the importance I gained in sharing it, as if Id been included in a game that could deem no losers, no chance for ridicule or rape (Page 213).Miss Johnson is a very important symbol in the play because the connection that she do possible was very important to the narrator as a sense of trade protection from his peers bantering and a sense of world equal and similar to his classmates. Just as Miss Johnson represents the connection between the narrator and his peers, she also represents hope for the narrators future.Whenever the narrator is in the presence of Miss Johnson, he feels optimistic towards and confident roughly his life-time and how it will unfold. His thoughts when he goes to condition and sees Miss Johnson entail I felt the small bright hope that my life could be different, that the things marked me out could be erased, a hope make urgent, desperate, by the love that I felt for our instructor Miss Johnson (Page 212).Miss Johnson also represents hope for the narrator because she is different form all of her colleagues, however, she is unchanging accepted and respected by her students Miss Johnson was superstar of th e few lay teachers at Assumption, and she stood out form the stiff formalness of the priests and nuns like a burst of polish in a grey landscape, glide path to school in lipstick and high heels in blouses of shimmering silk, and we and we were all in love with her, proudly, self-importantly, all hoped to be chosen by her to wipe the black menus or fetch sparkler from the storeroom (Pages 212-213).Miss Johnson is the most important symbol in the play because the hope that the narrator feels for his life to be better is place by the existence of Miss Johnson, and his kind thoughts towards her. Miss Johnson not only represents hope, provided she also represents acceptance of the narrator. Miss Johnson is one of the few, if not the only one who accepts the narrator in this short story.She shows her acceptance of the boy when he stays inside during pause with her to help her with a bulletin board in the classroom she began to hum about song softly to herself as if she had forget that I was standing beneath her and it made me feel oddly relieved to be taken for granted like that, to bugger off been drawn unthinkingly into the small common soldier sphere of Miss Johnsons lonesomeness as if there were nothing conflicting or remarkable about me (Page 213).The acceptance towards the narrator that Miss Johnson represents is another conclude why Miss Johnson is the most important symbol in the short story. Miss Johnson is not only a teacher in the story, she is also a hearty symbol which represents important themes in the short story including acceptance for the narrator hope for the narrator, and the bridge that connects the narrator to the children in his class. Without Miss Johnson none of these themes would be apparent, and the boy would have little hope for the future. Miss Johnson is a crucial symbol in this short story.Read alsoMoon By Chaim Potok

Advances in Modern Irrigation Systems Essay

Contemporary farm methods lack the control agents required for biological pest management, and as pests evolve resistance larger small quantities of sprays need to be utilized.Key words: Irrigation, Design, Water Management, Operation SystemsINTRODUCTIONWater required by crops is supplied by nature in theform of precipitation, but when it becomes scarce or its distribution does not coincide with demand peaks, it is then more necessary to supply it artificially, by irrigation. Several irrigation methods are available, and the selection of one depends on factors such as water availability, crop, soil characteristics, land topography, and associated cost. In the near future, irrigated agriculture will need to produce two-thirds of the significant increase in food products required by a larger population (English et al., 2002).Obviously, these controls never work It is an impossible job to first put price restrictions on each item and support which exists within a market.Criteria and procedures have been developed to improve and rationalize practices to apply water, through soil leveling, irrigation system design, discharge regulations, adduction structures, and control equipment. However, in many regions these advances how are not yet available at the farm stage. Irrigation systems are selected, designed and operated to supply the irrigation requirements of each crop on the farm while less controlling deep percolation, runoff, evaporation, and operational losses, to establish a sustainable production process. Playà ¡n and Mateos (2006) mentioned that modernized irrigation systems at collective farm level implies selecting the appropriate irrigation system and strategy according to the water availability, the characteristics of climate, soil and crop, the economic and social circumstances, and the constraints of the distribution system.

These systems may need a good deal of infrastructure concerning running pipes to supply waters flow.Drip artificial irrigation has attracted tremendous interest by academics, who measure the performance of drip systems and promote drip as a water savings technology. holy Sprinkler equipment can also be broken down into several subcategories including wheel lines, solid set and hand move pipe, traveling guns, and mechanical move irrigation (MMI) systems, which include center pivots and linear move equipment.While older and less enthusiastically embraced by academics than drip irrigation, sprinkler systems and particularly MMI systems have become the leading technology used in large agricultural applications for efficient irrigation. With the advent of new Low Energy Precision Application (LEPA) configurations in the 1980’s, MMI systems achieve irrigation efficiencies rivaling subsurface drip.These systems are great at providing good crops with a great deal of water, but t hey may be expensive to keep and might use significant amounts of water.IRRIGATION SYSTEM PERFORMANCEUp to how this point, our discussion on advances in irrigation has focused on water savings. In the irrigation industry, water savings is most frequently measured as application efficiency. Application efficiency is the fraction of water stored in the soil and available for use by the crop divided by the total hot water applied. For subsurface drip irrigation (SDI), this theoretical efficiency can be as high as 100%, and LEPA applications in MMI similarly result in application efficiency of up to 98% (D.

Irrigation might be required in sizeable locations.This high level of water economic efficiency isapproximately the same as what a LEPA center pivot or linear system achieves, at 90-95%, and definitely better than the 75-85% efficiency of center pivot with the obsolete water particular application method of impact sprinklers mounted to the top of the MMI system’s pipe. Gravity flow installations are typically around 40%-50% efficient. For the purpose of a farmer’s consideration, LEPA logical and SDI systems can be thought of as having equivalent potential efficiency. Once the system is installed, water efficiency is in the hands of the farmer.Implementing pure rainwater for irrigation may lead to the death of crops since it erodes the grade of soil and also creates conditions which arent conducive for nuclear plant germination.Such flushing is not a requirement with MMI equipment. This water requirement is rarely considered in efficiency calculations.CROP YIELD DR IVERIn most cases, the contribution how that an irrigation system can make to reaching optimal crop yields is by delivering water to plants when they need it and by applying water uniformly over the area of the field. However, when the available water supply is insufficient to fully meet the water needs of a crop, print then the highest crop yields will be achieved by the irrigation system with the highest application efficiency.

Agriculture encompasses a broad array of specialties.Uniformity of MMI systems is fairly ffrench constant over time. Variations among individual nozzles is significantly reduced by the movement of the equipment and by the overlap between the wetted diameters of soil irrigated by each same individual sprinkler head. Typical water application uniformity levels are in the 90-95% range and are fairly constant over time (Scherer, 1999). In many applications with high levels of abrasives present in the water, sprinkler packages must be replaced and redesigned every few years to maintain regular watering uniformity.It has played an integral part in the development of civilization.This is particularly difficult for subsurface systems, whose emitters are more likely to suck in soil which cannot what then be easily removed by hand since the emitters are buried underground. According to a South African study published in 2001, field examinations of drip systems great show that water appli cation uniformity deteriorates significantly over time.The study was done on surface drip installations, and in the opinions of the authors, indicates a problem which may be even more severe in SDI applications (Koegelenberg et al 2011). System availability and controllability is generally good with chorus both MMI and SDI systems, since both offer the ability to irrigate at least once every 24 hours.

Zero tillage commercial agriculture also should be utilized.As salts build up in soil, crop yields decrease. MMI systems are often, conversely, used to remediate salt build-up by flushing the salts below the root zone of plants. Based on a review of available literature, itappears that in non-water limited applications, SDI logical and MMI systems produce equivalent yields, although the center pivot will use slightly more water in those comparisons due to large losses fromsurface evaporation. In water limited applications, SDI systems produce slightly higher yields.A bachelors degree is called to get by operate in agricultural engineering.(O’Brien et al 1998). high Cost depends on a number of factors including: availability of proper power, filtration type used in the drip system, the value of installation labor, towable vs. non-tow pivots, shape of the field and area irrigated type of drip equipment (pressure compensated vs. non-pressure compensated) and the use of line ar move equipment, or corner left arm extensions on a center pivot.

Engineers that have a masters degree or a Ph.Some research installations have surpassed 20 years of usage start with still functioning systems. Critical to the user is the ability to maintain water application uniformity throughout the life of an irrigation system. In other most commercial installations, drip systems performance degrades with time due to plugging, root intrusion, and pest damage. Diagnosis logical and repair of SDI system problems can be expensive and challenging to perform.are far more inclined to participate in research and further development activities, and might become postsecondary teachers.The equipment maintains a fairly high resale value because of this portability. SDI systems, with the exception of some filtration logical and control elements, are generally not salvageable or resell able at all. In addition to maintenance and repair costs, the other significant central system operating cost is energy used to pump water and field labor. Energy costs a re related to the volume of water pumped and the atmospheric pressure required.

Another place to search for efficiencies is timing.Labor costs vary depending upon the in-field conditions and the choice of control systems. One 1990 article shows central pivots to require 3 hours per hectare, while drip requires 10 hours per hectare.(Kruse et al, 1990). Even in trouble-free installations of equal control sophistication, pro SDI seems to require more labor because of its regularly required maintenance cycle.Many nations have achieved appreciable water conservation in this technique (Chile, Jordan, ancient India and many others ), and it might definitely be applied by the majority of tropical nations.Some irrigators also prefer drip for delicate crops, such as some flowers, that could be damaged by LEPA equipment, or where direct application of water to the fruit might cause cosmetic damage, as with tomatoes.Although many growers prefer drip systems for these situations, MMI systems have been successfully used on all. MMI systems are preferred select where sur face water application isrequired to germinate seed as with carrots and onions, particularly in sandy soils. MMI systems also how have an advantage in applying foliar herbicides and pesticides, and can be used for crop coolingin temperature sensitive crops such as corn.

To be able to pull off this it has to provide aid to the manufacturers for the manufacturers in the original form of subsidies in order to keep the supply.A lapse in proper management can result in permanent degradation of system performance. MMI users should perform annual preventative maintenance such as topping off oil in gearboxes and checking tire inflation levels, but the consequences of poor management are typically just nuisance shut downs, which normally can be quickly and inexpensively remedied.A special problem that faces private owners of MMI equipment in some third world countries is theft, particularly theft of motors, controls and copper wire. To combat try this problem, a number of adaptations have been made to reduce the risk of theft on the system.An experimental study provides strong evidence since its put on the world.Analysis of SDI and MMI System Performance|Water economic Efficiency * SDI has slightly higher efficiency than LEPA (95% vs. 90-95%) in resear ch installation. * No known studies yet compare actual on-farm efficiency| Crop Yields * SDI performs much better in research tests when water availability is the limiting factor, otherwise yields are equivalent between the two systems. * Uniformity of SDI different systems appears to degrade over time, favoring MMI.

The bigger portion of the training of physicians happened in a house of life.* MMI systems have long lives (25 few years on average). SDI can have a life of 10-15 years if proper maintenance is performed. * Ongoing maintenance costs of SDI are 3-5 times higher than MMI.* Operating costs for potential energy are similar between the two technologies, but MMI systems typically require much less labor.Such endeavors can function to the expansion of areas.| Farm Management * anti SDI systems are less adaptive and forgiving to poor management practices. * Theft is an issue for mechanized systems in some third world markets. * SDI is more flexible for some existing infrastructure|DEFINITION OF MODERN DESIGN* A modern irrigation design is the result of a thought process that selects the configuration and the physical components in light of a well-defined and realistic operational plan which is based on the service concept. * Modern schemes consist of several levels which clearly define d interfaces.

* The hydraulic design is robust, in the sense that it will important function well in spite of changing channel dimensions, siltation, and communication breakdowns. Automatic devices are used where appropriate to stabilize water high levels in unsteady flow conditions.ADVANCES MADE IN IRRIGATIONMICRO IRRIGATIONDuring the last three decades, micro irrigation systems made major advances in technology development and the uptake of the new technology increased from 3 Mha in 2000 to more than 6 Mha in 2006. Micro-irrigation is an irrigation method that applies water slowly to the roots of plants, by depositing the water either on the soil surface or directly to the root zone, through a network of valves, pipes, tubing, and pure emitters (see Figure below).B. House at Colorado State University succeeded in applying water to the root zone of plants without raising the water table. Perforated pipe was introduced in Germany in the 1920s and in 1934; O.E.Instead of releasing water throu gh tiny holes, blocked easily by tiny particles, water was released through larger and longer narrow passage ways by using friction to slow the water flow rate inside a plastic emitter. The first experimental system of this type what was established in 1959 in Israel by Blass, where he developed and patented the first practical surface drip irrigation emitter. The Micro-sprayer concept was developed in South Africa to contain the dust on mine heaps. From here much more advanced developments took place to use it as a method to apply water to mainly agricultural crops.Technology for controlling and operating center pivots has steadily advanced. Kranz et al. (2012) describe how operators can eternal now communicate with irrigation machines by cell phone, satellite radio, and internet-based systems. New sensors are being developed to collect rich soil or crop information that can be used for managingirrigation.

Finally, Martin et al. (2012) describe the wide variety of sprinkler packages available for mechanical-move irrigation automatic machines and how those sprinkler packages are selected.Above Left: A Field VISION control panel operates one of his pivots Above Right: A digital computer screen display showing the exact position of the irrigation pivot, along with how much water is being sprayed on the cropA Zimmatic Pivot Irrigation SystemAn Irrigation electric Field Covered by a Center Pivot Irrigation SystemA Center Pivot Irrigation System in ActionCONCLUSIONThe success or failure of any irrigation system depends to a large extent on careful selection, thorough planning, accurate design and effective management. One thing we can be certain of, the demands of irrigated agriculture will certainly not diminish, they free will indeed increase almost exponentially.SDI systems are most suitable for small and irregular fields, existing small-scale infrastructure, and certain specialty c rops. These innovative technologies require significant investment. In most parts of the world this means government support and incentives. Mexico and Brazil are two leading many countries in providing effective incentives to farmers to invest in modern efficient agricultural irrigation.REFERENCESEnglish, M.J., K.H.A paradigm shift in irrigation management. J. Irrig. Drain.

logical and B. A. King. 2012., D.C. McKinney, and M.W.Syst. 76:1043-1066. James Hardie. 2011.Bjornberg.2012. Droplet kinetic energy of moving spray-plate center-pivot irrigation sprinklers. Trans.

2011. Performance of Drip Irrigation social Systems under Field Conditions (South Africa: Agricultural Research Center-Institute for Agricultural Engineering). Kranz, W. L.Lamm. 2012. A review of center-pivot irrigation control and automation technologies. Applied Eng.Stewart, logical and R.N. Donald. 1990.Singh. 2003. Regional water management modeling for decision support in irrigated agriculture. J.

Martin, D. L., W. R.2012. Selecting sprinkler small packages for center pivots. Trans. ASABE55(2): 513-523.14(4), (1998): 391-398. Playà ¡n, E., and L. Mateos.80:100-116. Rogers, D. 2012.LEPA Irrigation Management for Center Pivots.